Spring Plungers
Morton offers a full selection of Spring Plungers manufactured from steel, stainless steel, brass, and nylon. Most spring loaded devices are available in inch and metric sizes with both screw driver slots and hex drive sockets. Spring Plungers are offered with varing internal spring tensions to help meet your exact requirements.
Ball Plungers
Morton offers a full selection of Ball Plungers manufactured from steel, stainless steel, brass, and nylon. Most spring loaded devices are available in inch and metric sizes with both screw driver slots and hex drive sockets. Ball Plungers are offered with varing internal spring tensions to help meet your exact requirements.
Tooling Balls
(12)- Solid, one piece construction.
- Press fit + 0.0003 - 0.0000 shank “P”.
- Slip fit + 0.0000 - 0.0004 Shank “S”.
- Rc 55-60
- Used as precise reference points in critical machining applications.
Tooling Balls with Shoulder
(12)- Solid, one piece construction.
- Press fit + 0.0003 - 0.0000 shank “P”.
- Slip fit + 0.0000 - 0.0004 Shank “S”.
- Rc 55-60
- Used as precise reference points in critical machining applications.
Bullet Nose Dowels
(4)- Material: 1144 steel
- Hardness: HRC 61-65
- Black oxide finish
- Tolerances: A = +.0000 / -.0005
B = +.003 / -.003
Bullet Nose Pins
(6)- Material: 1144 steel
- Hardness: HRC 61-65
- Black oxide finish
- Tolerances: A = +.0000 / -.0005
B = +.003 / -.003
Bullet Nose Pin Relieved
(6)- Material: 1144 steel
- Hardness: HRC 61-65
- Black oxide finish
- Tolerances: A = +.0000 / -.0005
B = +.003 / -.003
Bullet Nose Dowel Liner
(4)- Material: 1144 steel
- Hardness: HRC 61-65
- Black oxide finish
- Tolerances: ID (A) = +.0004 / -.0000
OD (B) = +.0000 / -.0005
Bullet Nose Pin Liner
(6)- Material: 1144 steel
- Hardness: HRC 61-65
- Black oxide finish
- Tolerances: ID (A) = +.0004 / -.0000
OD (B) = +.0000 / -.0005
Hex Head Rest Buttons
(16)- Case hardened steel, black oxide finish.
- “B” dimension…+0.012-0.003
- Head thickness can be held to +0.0005-0.0000 if required. Prices available upon request.
Ball Plunger Detent
(8)- 440C stainless steel hardened and ground
- Used as a mating detent for ball plungers
- “B” tolerance: + .002/- .0000
Rest Pads
(2)- Case hardened, black oxide finish
- RP10 has 2 holes
- RP20 has 4 holes 1" apart
- “D” dimension…+.005-.005
- Holes designed for 3/8" socket head shoulder screw
